The car is equipped with a 5-speed automatic transmission with electronic control. Switching to higher and lower levels is carried out automatically.
For reasons of fuel consumption and environmental protection, on some versions the transmission is designed so that the vehicle's maximum speed is only achieved in the "S" position.
The gearbox is also equipped with a tiptronic system. This system gives the driver, if desired, the ability to manually change gears.
Switching to higher and lower forward gears is carried out automatically.
Pulling away
- While holding down the lock button (on the control lever), move the control lever to the desired position, for example, position D, and release the lock button.
- Wait until the automation switches on, creating a forceful connection between the gearbox and the drive wheels (at the moment of switching on, you will feel a slight push).
- Release the brake pedal and press the accelerator pedal.
- Hold the car with the brake pedal, for example, at traffic lights.
- Do not press the accelerator pedal while doing this.
- Press and hold the brake pedal.
- Fully apply the handbrake.
- While holding down the lock button, move the control lever to the “P” position and release the lock button.
When parking on level ground, it is enough to set the control lever to the “P” position. If the road is sloping, first tighten the parking brake all the way and only then move the control lever to the “P” position. This reduces the load on the locking mechanism and makes it easier to release the control lever from the “P” position.
Attention.
- When shifting before moving off, do not press the accelerator pedal - there is a danger of an accident!
Control lever positions
This section describes each control lever position.
The actual position of the control lever is displayed accordingly on the displays of the instrument cluster.
P - parking lock
In this position, the drive wheels are mechanically blocked. The parking lock may only be activated when the vehicle is stationary.
To set the control lever to the “P” position and release it from this position, press the lock button (on the control lever) and at the same time the brake pedal.
R - reverse gear
When the control lever is placed in this position, reverse gear is engaged.
Reverse gear may only be engaged when the vehicle is stationary and the engine is idling.
To set the control lever to the “R” position, press the lock button and the brake pedal at the same time. When the ignition is turned on and the control lever is in the “R” position, the reverse lights come on.
N - neutral position (idle position)
This position is the idle position.
D - main position when moving forward
In this position, shifting to higher and lower forward gears is carried out automatically, depending on engine load, speed and dynamic shift program (DSP). To move the control lever from position "N" to position "D" when the speed is less than 5 km/h or the vehicle is stationary, you must press the brake pedal.
To be able to manually adjust the gear ratio to the driving conditions, in certain circumstances (for example, when driving in the mountains or with a trailer) it may be preferable to temporarily switch to the manual shift program.
S - sport position
Set the control lever to the "S" position when driving in sport mode. Later switching to higher stages allows full use of engine power reserves.
To move the control lever from the “N” position to the “S” position when the speed is less than 5 km/h or the vehicle is stationary, press the brake pedal.
Attention
- While driving, never set the control lever to the "R" or "P" position - risk of accident!
- Regardless of the selected driving mode (except for “P” and “N”), with the engine running, hold the car with the foot brake, since even in idling mode the kinematic connection of the engine with the wheels does not completely disappear - the car “crawls.” When the car is stationary with the mode turned on movement, do not inadvertently add gas (for example, by hand in the engine compartment). Otherwise, the vehicle will start to move immediately, possibly even with the parking brake fully applied - risk of accident!
- Before opening the hood and starting work with the engine running, move the control lever to the “P” position and tighten the parking brake until it stops.
Note
- If you inadvertently move the control lever to the “N” position while moving, before returning to “D” or “S” mode, release the gas and wait until the speed drops to idle.
- For reasons of fuel consumption and environmental protection, on some versions the transmission is designed so that the vehicle's maximum speed is achieved only in the "S" position.
Control lever lock
Locking the control lever prevents the vehicle from inadvertently engaging the range of motion and thereby preventing the vehicle from moving unintentionally.
Cancellation of blocking is carried out as follows:
- Turn on the ignition.
- Press the brake pedal and hold down the lock button at the same time.
Automatic control lever lock
When the ignition is turned on, the control lever is locked in the “P” and “N” positions. To release it from these positions, press the brake pedal. As a reminder to the driver, when the control lever is in the “P” and “N” positions, the following indication appears on the display:
"BIEM EINLEGEN EINER FAHRSTUFE IM STAND FUSSBREMSE BETATIGEN" (when selecting the driving mode of a stationary vehicle, press the brake pedal).
In addition, the automatic control lever locking symbol gj lights up on the control lever flap.
At a speed of approximately 5 km/h and above, the locking of the control lever in the "N" position is automatically canceled.
When the control lever is quickly moved through the "N" position (for example, from the "R" position to the "D" position), the control lever is not locked. This will give, for example, the ability to “rock” a stuck car. If the control lever is in the “N” position for more than 1 second when the brake pedal is released, it is blocked.
Lock button
The control lever lock button prevents the control lever from being inadvertently moved to certain positions. When this button is pressed, the control lever is released. The figure highlights the positions at which it is necessary to press the lock button.
Locking the key in the ignition switch
After turning off the ignition, the key can be removed from the lock only when the control lever is in position “P” (parking lock). After removing the key from the lock, the lever is locked in the “P” position.
Kick-down device
The Kick-down device allows for maximum acceleration.
When you sharply press the accelerator pedal and pass the point of resistance, the automatic switches, depending on the revolutions and speed, to a lower level. Switching to the next higher stage occurs immediately after reaching the maximum engine speed corresponding to this stage.
Attention. Remember that on a slippery road the drive wheels may slip when the Kick-down device is activated - there is a danger of skidding!
Dynamic Shift Program (DSP)
The automatic transmission is controlled electronically.
The automatic transmission is controlled electronically. Switching to higher and lower levels is carried out according to the movement programs stored in memory.
If you drive with restraint, the automatic system selects an economical switching program.
If you have a temperamental driving style with sharp acceleration and frequent speed changes, using the maximum speed or after sharply pressing the accelerator pedal (Kick-down), the automatic system operates in the range of sports programs. A late transition to higher stages allows you to fully utilize the engine power reserve. Downshifting occurs at higher engine speeds.
Selecting the optimal driving program for specific conditions is a continuous process. However, regardless of this, you can switch to a sportier program by sharply pressing the accelerator pedal. At the same time, the transmission switches to a lower gear corresponding to the actual speed of movement, providing the possibility of dynamic acceleration (for example, when overtaking) without the need to sharply press the accelerator pedal all the way. After switching back to a higher gear and in the appropriate driving mode, operation according to the original program is restored.
The mountain program controls gear selection on uphill and downhill slopes. Thanks to this, there is no need to shift when driving uphill. Pressing the brake pedal when driving downhill switches to a lower gear. As a result, you can brake with the engine without resorting to manual shifting.
Tiptronic mode
The tiptronic system also gives the driver the option of manual gear shifting.
Switching to manual mode
- Push the control lever out of position "D" to the right. When manual mode is engaged, “5 4 3 21” appears on the display, highlighting the currently engaged gear.
- When the control lever is moved forward (in the tiptronic position), a shift into higher gears (+) occurs.
- When the control lever is moved back (in the tiptronic position), a shift to lower gears (-) occurs.
When accelerating at 1, 2, 3 and 4 stages, the box will automatically switch to the next higher stage shortly before reaching maximum engine speed.
When switching from a higher gear to a lower gear, the automatic switch will only switch after it becomes impossible to increase the engine speed at different intervals.
When the kick-down device is operating, the transmission switches to the next lower gear depending on the speed and engine speed.
Emergency program
In the event of a system malfunction, the automation switches to the emergency program.
If the system malfunctions, the automation switches to the emergency program. This is signaled by the lighting up or extinguishing of all segments on the indicator panel at once.
In this case, the control lever can be moved to all positions. However, in positions "D" and "S" the 4th stage will be activated.
It is also possible to engage reverse gear "R". However, the electronic reverse gear lock is disabled when operating in emergency mode.
In emergency mode, the manual shift program (tiptronic) is switched off.
If the gearbox is switched to emergency mode, contact Audi as soon as possible and have the fault rectified.
Tiptronic steering wheel
The buttons located on the steering wheel also give the driver the opportunity to manually change gears.
Upshifting
- Press the top side of one of the keys (+).
- Press the underside of one of the keys (-).
Of course, manual gear shifting is also possible using the center console control lever.
AUDI A6 c7 c6 c5 gearbox repair
MECHANICAL GEAR SHIFT BOXES AUDI A6
installation replacement buy all modifications 1.8 1.9 2.0 2.3 2.4 2.5 2.6 2.7 2.8 3.0 3.1 4.2
repair and restoration of shafts argon welding of manual transmission housing
Moscow city
Artem 8 965 126 13 83 Vadim 8 925 675 78 75
Complete vehicle diagnostics during repairs – free of charge!
Having a high level of professionalism, extensive experience in repairing manual transmissions, and our own warehouse of spare parts, we carry out diagnostics, sale, replacement and repair of all types of manual transmissions for the AUDI A6 car. Box repair begins with an initial, mandatory free diagnosis.
The cost of repairing the AUDI A6 gearbox:
A range of services for repairing a manual gearbox of the AUDI A6:
- consultation with a repairman /by phone free of charge/
- delivery of the car for repair /within Moscow RUR 3,000. From the Moscow region and other regions of the Russian Federation - by agreement/
- comprehensive vehicle diagnostics / determination of the presence of a malfunction in the engine, manual transmission, ABS, brake system; checking the vehicle's electrical circuits for corrosion, checking the kinematic damage of the unit, checking the transmission oil level, checking the functionality of the clutch hydraulic system/ - free of charge during repairs
- visual inspection, body integrity check
- checking the transmission oil content for the presence of steel, aluminum or bronze chips
- opening the pallet /if necessary/
- removal from the car
- disassembly, washing of parts and assemblies
- defect detection /presence of the car owner is mandatory/
- agreement with the car owner on the cost of complete repairs and the completion date of the repairs
- receipt from the spare parts/repairs warehouse. kit, consumables, components/
- repair / argon welding / gearbox housing if necessary
- assembly
- clutch replacement /at the request of the car owner/
- car installation
- refilling with transmission oil
- output diagnostics and test drive of the car
Warranty from 3 to 24 months or 60,000 km. mileage
We have a fundremanufactured and used gearboxesAUDI A6 /see article replacement/. If the car owner wishes, we can replace the faulty one with one taken from the exchange stock, which is often more economically feasible.
Prices for additional work
Spare parts for manual transmission repair:
- economy - from 3,000 to 8,000 rubles. /use, at the request of the car owner, only used parts to reduce the cost of repairs/
- business - from 8,000 to 28,000 rubles. /replacement of only directly damaged parts in the unit/
- executive - from 28,000 to 60,000 rub. /replacement, regardless of damage, as a set: oil seals, carrier bearings, needle bearings, synchronizers, stoppers, coupling hub locks - plus directly damaged parts/
Our own warehouse of spare parts necessary for the repair of manual transmissions. Bearings, seals, gears, synchronizers, gear couplings, shafts, differentials, manual transmission housings are in stock and on order for all brands of cars.
.jpg)
The gearbox repair shop is ready to perform the following work:
- replacement and repair of AUDI A6 gearbox
- replacement and repair of manual transmission AUDI A6
- replacement and repair of AUDI A6 gearbox
- AUDI A6 transmission oil change
- AUDI A6 clutch replacement
- replacement of release bearing AUDI A6
- replacement of the rear oil seal and crankshaft bearing of the AUDI A6
- replacement of the input shaft oil seal and drive seals of the AUDI A6
- replacing the input shaft of an AUDI A6 manual transmission
- replacing the secondary shaft of an AUDI A6 manual transmission
- AUDI A6 gearbox repair
- repair (argon welding) of the AUDI A6 manual transmission housing
- repair of the secondary shaft of the AUDI A6 gearbox
- replacing the fifth gear of a manual transmission (without removing the gearbox from the car) AUDI A6
- repair of 1st and 2nd gears of AUDI A6
- repair of 3rd and 4th gears of AUDI A6
- repair of 5th gear AUDI A6
- buy AUDI A6 gearbox
- buy manual transmission AUDI A6
- buy AUDI A6 gearbox
Call us to schedule a time for manual transmission diagnostics and repairs at a transmission repair shop. Pre-registration will allow you to find the most convenient solution; we are always ready to meet the client’s wishes.
Our specialized workshops for repairing manual transmissions of AUDI A6 manual transmissions provide high-quality service, diagnostics and repair of all types of gearboxes. We offer honest service for your repairs. Your presence is required at all stages of diagnostics and repair of the AUDI A6 gearbox; all work and components are agreed upon. The period for a gearbox overhaul is from 0.5 to 1 working days (subject to the availability of the necessary parts).
We work seven days a week.
Works for us 24/7 line consultations on the repair of manual transmissions (8 965 126 13 83) and delivery for repairs by tow truck (8 926 167 15 40). A tow truck for manual transmission repairs is provided for a fee (within the Moscow Ring Road - 3000, outside the Moscow Ring Road by agreement).
The cost of work for a major overhaul of an AUDI A6 gearbox is 10,000 rubles (input and output diagnostics, removal and installation of the gearbox, disassembly and reassembly, weekend test drive) + cost of components.
Input diagnostics are carried out with the obligatory presence of the car owner for 30 - 40 minutes after removing the gearbox from the car (inspection, disassembling the manual transmission, washing the internal gearbox housing from metal shavings, dismantling the shafts).
Removal of the gearbox from the vehicle, disassembly and troubleshooting takes place on the day you call for repairs.
Warranty for repair of manual transmission gearbox of AUDI A6 from 1 to 12 months or 60,000 km (set individually for each car - depending on the components during repair).
Audi A6 gearbox repair
Audi A6 is a new fifth-generation sedan made in Germany, introduced in 2018. In design, the new model most closely resembles the Audi A7 Sportback; the car is built on the same modular MLB Evo platform. The car is equipped with the latest electronic systems: special radars, video cameras, infrared sensors provide almost complete automatic control. The car received a wide range diesels and motors on gasoline with a wide power range: the maximum power of a gasoline engine is 340 hp, a diesel engine is 204 hp. The updated car has excellent driving performance and fast acceleration.
Features of gearboxes
The latest version of the sports sedan from Audi received several versions of the transmission: paired with gasoline engines, an 8-speed hydromechanical machine, diesel versions of the engines work with a seven-speed dual-clutch automatic transmission. Classic mechanics without electronic control turned out to be unavailable for the latest generation of cars, although it was provided to customers in previous generations.
In the previous restyled version of 2014, in addition to the robotic gearbox, the car was equipped with a 6-speed manual gearbox. In Russia, manual transmissions are always in high demand, since this type of gearbox provides full control of the car and at the same time is the cheapest. Installing mechanics allows you to reduce fuel costs and not depend on capricious electronics - the car becomes more reliable and economical.
A prerequisite for long-term trouble-free operation of a manual transmission is proper maintenance, but it is cheaper than for automatic and robotic transmissions Oil change It is enough to carry out once every 70 thousand kilometers, and a small amount of transmission fluid is enough.
Possible causes of gearbox problems
The mechanics are characterized by maximum reliability; the duration of its use can reach 300 thousand kilometers and even more. This allows you to use the gearbox throughout the entire service life of the vehicle without major repairs. However, this is only possible with proper regular maintenance and adherence to recommended oil change intervals. Flushing allows you to free the gearbox from contaminants and prevent possible malfunctions.
The following signs will indicate problems with such a gearbox:
- Noticeable extraneous noise. Crackling, grinding, crunching occurs when there is insufficient amount of transmission fluid in the gearbox, as well as when parts are severely worn due to increased friction. During diagnostics in the workshop, it is necessary to find the cause and quickly eliminate it.
- Problems with turning on the desired speed mode. It becomes difficult to move the lever to the desired position, the problem occurs due to wear and tear on the components of the shift mechanism.
- Grinding or cracking sound when trying to change gear. Often it indicates a clutch malfunction; wear of the mechanism is possible within the first 100 thousand kilometers.
Professional repairs in a workshop can completely restore the functionality of the gearbox and return it to operation. Take advantage of the services of our service center professionals in Moscow.
What do we offer?
A specialized workshop carries out repair work on all types of gearboxes of German foreign cars. Mechanical repairs will cost inexpensive: all works are offered at affordable prices prices, it is also possible at a favorable price cost purchase a complete set of spare parts. At an affordable price for exchange new and boo spare parts can be purchased immediately without a long wait for an order.
In case of serious damage, it is recommended buy Audi A6 gearbox assembled at a low price. This will quickly solve the problem with repairs and guarantee. That the installed unit will work flawlessly for several years. A 2-year warranty is provided - it confirms the quality of the work performed.
To schedule your car for diagnostics and get additional necessary information, call the numbers provided - a workshop employee will provide detailed advice on all issues.
