If you are a client of the Garden Mechanisms online store, then you can use the service of qualified pre-sale preparation of equipment. It is implemented on the basis of our own Service Center, which is authorized and certified by the world's leading manufacturers.
How the equipment starts in operating mode determines its further operation. In our case, an experienced Service Center employee will perform a test run at idle. Especially for our clients, we will adjust and configure the equipment so that it is ready for the upcoming loads. After this, if the results of the check do not raise any complaints, the instrument is sent to its rightful owner.
What are we doing?
- checking the contents (when opening it is checked whether everything is in place)
- assembly of the finished product (if necessary)
- checking adjustments
- refilling equipment with oil
- lubrication control in gearboxes and gearboxes
- product launch
Everything for the Client
- Once the instrument is unpacked for pre-sale preparation, it is handled by a professional. Therefore, we can guarantee the quality of our services.
- You receive equipment that is 100% ready for use.
- Proper commissioning means excellent results in the future.
Important
When making a purchase of gas-powered tools, the managers of the Garden Mechanisms online store offer everyone the service of undergoing pre-sale training. If you wish, you can refuse this service.
In what cases are pre-sale preparations abandoned?
- If you wish, receive the product in the original packaging and open/assemble it yourself.
- If the product is intended to be given as a gift and traces of equipment operation are undesirable (remains of fuel in the tank, filled with oil, opened packaging).
- In case it is expected to be transported further, which is impossible with the product assembled. For example, it is planned to send the goods through a transport company or by mail, or further transportation by transport is planned, where the assembled product does not fit in dimensions.
Cost of pre-sale preparation
The price includes: unpacking and checking the package (when opening, check whether everything is in place), assembling the finished product (if necessary), checking adjustments, filling equipment with oil, refueling, checking lubrication in gearboxes and gearboxes, starting the product. Oils and lubricants are not included in the cost of equipment assembly.
Gasoline is poured minimum quantity. The approximate cost of assembling the product can be found in the table. The cost depends on the complexity of the assembly and the time spent on it. Please check with the manager when placing your order for conditions, terms and exact amount of assembly/pre-sale preparation. Free pre-sale preparation applies only to all products of brands and. The products of these manufacturers are marked with a special “Free pre-sale preparation” badge.
Installation and assembly of additional attachments for tractors and walk-behind tractors is paid separately and the cost depends on the type of equipment and complexity of the work. Please check with our managers for the timing and cost of this service.
| Chainsaw, Trimmer (with two-stroke engine) |
1000 rub. |
| lawnmower, motor drill, trimmer (with four-stroke engine) |
1500 rub. |
| Garden tractor/rider | 3000 rub. |
| snow blower, Cultivator, Motoblock |
1500 rub. |
| Big tractor | 5000 rub. |
The domestic brand Champion pleases with inexpensive but high-quality garden equipment and tools. The PS257 gasoline sprayer will be useful in the beds and in the garden, and at the same time, the purchase will not put a big dent in your pocket, as it costs $200.
Inexpensive but effective
Unit weighs in “dry” form a little more than 11 kg, but if you fill it to capacity 14 liter working tank, yes, fill up with gasoline (another 1.5 liters), the weight is not for fragile ladies. However, the heaviness on the back is compensated by the good performance of the unit.
Universal gardener's assistant
The manufacturer claims the horizontal and vertical range of the jet is up to 15 m, but in reality it hits 7 - 8 m. But the sprayer can work with liquids and dry mixtures. This is such a universal assistant.
Full tank of fuel enough for 3 hours of continuous work, and at the maximum of 4 spray intensity modes, a full tank of liquid will evaporate in a little less than 5 minutes.
In general, given the affordable price and very good technical characteristics, CHAMPION PS257 can really be considered a champion, albeit in the middle class. Still, the same Oleo-Mac MB 90 or STIHL SR 450 in terms of performance cannot be surpassed.
If you are a client of the Garden Mechanisms online store, then you can use the service of qualified pre-sale preparation of equipment. It is implemented on the basis of our own Service Center, which is authorized and certified by the world's leading manufacturers.
How the equipment starts in operating mode determines its further operation. In our case, an experienced Service Center employee will perform a test run at idle. Especially for our clients, we will adjust and configure the equipment so that it is ready for the upcoming loads. After this, if the results of the check do not raise any complaints, the instrument is sent to its rightful owner.
What are we doing?
- checking the contents (when opening it is checked whether everything is in place)
- assembly of the finished product (if necessary)
- checking adjustments
- refilling equipment with oil
- lubrication control in gearboxes and gearboxes
- product launch
Everything for the Client
- Once the instrument is unpacked for pre-sale preparation, it is handled by a professional. Therefore, we can guarantee the quality of our services.
- You receive equipment that is 100% ready for use.
- Proper commissioning means excellent results in the future.
Important
When making a purchase of gas-powered tools, the managers of the Garden Mechanisms online store offer everyone the service of undergoing pre-sale training. If you wish, you can refuse this service.
In what cases are pre-sale preparations abandoned?
- If you wish, receive the product in the original packaging and open/assemble it yourself.
- If the product is intended to be given as a gift and traces of equipment operation are undesirable (remains of fuel in the tank, filled with oil, opened packaging).
- In case it is expected to be transported further, which is impossible with the product assembled. For example, it is planned to send the goods through a transport company or by mail, or further transportation by transport is planned, where the assembled product does not fit in dimensions.
Cost of pre-sale preparation
The price includes: unpacking and checking the package (when opening, check whether everything is in place), assembling the finished product (if necessary), checking adjustments, filling equipment with oil, refueling, checking lubrication in gearboxes and gearboxes, starting the product. Oils and lubricants are not included in the cost of equipment assembly.
Gasoline is poured minimum quantity. The approximate cost of assembling the product can be found in the table. The cost depends on the complexity of the assembly and the time spent on it. Please check with the manager when placing your order for conditions, terms and exact amount of assembly/pre-sale preparation. Free pre-sale preparation applies only to all products of brands and. The products of these manufacturers are marked with a special “Free pre-sale preparation” badge.
Installation and assembly of additional attachments for tractors and walk-behind tractors is paid separately and the cost depends on the type of equipment and complexity of the work. Please check with our managers for the timing and cost of this service.
| Chainsaw, Trimmer (with two-stroke engine) |
1000 rub. |
| lawnmower, motor drill, trimmer (with four-stroke engine) |
1500 rub. |
| Garden tractor/rider | 3000 rub. |
| snow blower, Cultivator, Motoblock |
1500 rub. |
| Big tractor | 5000 rub. |
It is very popular and in demand among gardeners, landscapers, landscapers - for an adequate price, reliability, ease of maintenance and operation.
Features of the Champion PS257 petrol garden sprayer
- Output power reaches 3.4 hp.
- Spraying reaches 15 meters.
- The tank holds up to 14 liters of chemicals.
- Good control ergonomics.
- Vibration damping system - comfortable work over a long period of time.
- One year manufacturer's warranty.
Specifications
|
Main functions |
|
|
Engine power (maximum) |
3.4 hp / 2.8 kW. |
|
Productivity - release-spray speed |
from 0.14 to 3.03 liters per minute of liquid substances, up to 4 kg. dry substances. |
|
Capacity of plastic liquid container |
14 liters. |
|
Speed adjustment |
yes - depends on the force of pressing the gas button. |
|
Spray radius |
up to 15 meters. |
|
Filter hole diameter |
1 mm.. |
|
Frame |
impact resistant plastic. |
|
Engine model/engine size |
Champion / 56.5 cm³. |
|
engine's type |
2-stroke single cylinder. |
|
Engine cooling |
air-forced. |
|
Engine starting |
manual starter - recoil starting mechanism. |
|
Working mixture: Gasoline with an octane number of at least AI-92 is mixed with two-stroke additive oil in a ratio of 1:50, 1:40 (depending on the brand of oil). The manufacturer allows the use of oil from various manufacturers. |
|
|
Fuel tank capacity |
1.5 liters. |
|
Fuel consumption |
up to 0.55 l/hour. |
|
Additional functions |
1) Anti-vibration system. 2) Backpack straps for comfortable movement of the operator. |
|
Equipment |
|
|
Package |
cardboard box. |
|
Homeland of the brand / Country of origin |
USA/China. |
|
Weight |
9.5 kg. |
|
Guarantee |
1 year. |
In our store you can always buy this model of Champion petrol garden sprayer at the minimum recommended price in Moscow and on the Internet. Come to us in Shchelkovo and purchase the selected product.A large assortment in one place and at reasonable prices is not easy to find in cities close to us (in Korolev, Ivanteevka, Sofrino, Chernogolovka, Fryazino, Fryanovo, Balashikha, Mytishchi, Pushkino), so we invite customers to visit us and see for themselves.
