Solaris front suspension detailed diagram. Checking the technical condition of the front suspension parts on a car

We are learning to understand each other. But for this we need to talk, share. The time of isolation is passing. The time is coming to communicate and express yourself in life! We are who we are. But you can't stand still forever. We need to be better! overcome yourself! Believe in yourself! Set high standards for yourself and achieve your goals! This is the only way to improve your life and the lives of your loved ones!

Don't look at what's going on around you. Look inside yourself! try to understand yourself! Try to understand what motivates you and if you don’t like what motivates you, change it. Set yourself up so that you are the engine of your life and not your environment. Then you will become a person and you will be respected.

A noble goal is to work on yourself! After all, by working on yourself, you change the world around you. To make things better, we must strive for better. Not to desire, but to dream, not to indulge, but to love. Find your place in life and benefit society, benefit the people around you.

and the no less popular Kia Rio.

Korean cars that have swept our market like a wave. These brands have become popular in a very short period of time. And these are not simple words. The motto of these cars is, first of all, innovative design, certainly beautiful harmonious forms. Exterior and interior that revitalized the entire range of passenger cars, setting a high bar. And as time passes, we see how successful designs are being implemented on other brands in one form or another, there is a trace. So the move was right. But the basic platform on both Solaris and Rio turned out to be not so successful. And the triple modernization did not correct the main problems of the suspension. And therefore, when buying a car for more than half a million, I would like to have a car with adequate suspension. Unfortunately, Russia has two problems. I won’t talk about the first one, but the second one is our roads. And here the joy of the purchase passes quickly. But the car is good. Is it possible to customize it for yourself? Why not? Of course it is possible and necessary. After all, we buy various little things for beauty or convenience, sometimes paying a lot of money for it. Why can’t you improve your car in terms of its behavior on the road? Isn't that the most important thing?

Need stability on the highway? No problem. Shouldn't there be any swing? This is solvable. Is the suspension flimsy and breaks? And there is a solution. Small things hammering the fifth point? This can be solved and noise from road unevenness can be reduced. This can all be solved. And your humble servant decided this for himself. I studied and studied this with interest for almost three years. And he came up with a certain concept in which it is possible to improve the suspension of this platform, not in mock-up slang in words, but in real deeds, with real developments and tests. Testing time and reviews from owners of those who decided to redo the suspension. More than three years have passed. The year is 2015. Has the problem been resolved at the plant so far? Formally yes! The stern rocking was removed and the suspension was strengthened. But there is no need to delude yourself about this. The problem is still not resolved. Why do I say that the previous changes had little result and the latest reincarnation completely worsened the results. And this is not an unfounded statement, but the result of working with correspondence. Real reviews from owners on websites, letters that I receive in large numbers have similar complaints about the suspension. The main thing is insufficient stability at speeds of more than 100 km/h. Control is not clear enough when performing maneuvers. Unpredictability of car behavior on uneven surfaces. Weak suspension to breakdown. There is a thread about this on the forumI think that my Hyundai Solaris has a bad suspension! http://solaris-club.net/forum/showthread.php?t=6178 and for the sake of fairness I will say that there is another topicI think my Solaris has a good suspension! http://solaris-club.net/forum/showthread.php?t=5498 But there are 127 entries in the first topic and 123 in the second, but views in the first are 56 thousand. In the second, 36 thousand. This suggests that this problem is more likely to exist than not. Moreover, not everyone wants to simply and truthfully write about their car because so much money was given away. And in terms of the number of views, the first one is one and a half times higher. This indicates that there is a problem. Another proof that there is a problem Interest in the topic On the website "Нуundai Solari-Club Russia"Adaptation of the Solaris chassis to Russian roads http://solaris-club.net/forum/showthread.php?t=6394 over 3000 posts and over 450,000 views! And also a topic on the website "Kia Rio-Club Russia"I'm redoing the suspension http://kia-rio.net/forum/showthread.php?t=2508.Of course, you can ignore the problem and you can have what you have.But don’t you want to have the best if there is such an opportunity?

And so let's start with what happened. It all started with Solaris from the first batch produced in 2010-2012. The car is very good, beautiful, reliable and simple, inexpensive to maintain.
I have a car from this lot. Even during the purchase and transfer, I noticed that the stern of the Solaris gallops on uneven surfaces and sways especially unpleasantly on the waves. But the car is new, rose-colored glasses and this is the first foreign car. It was significantly different in the flow of cars with its flowing lines; now many manufacturers have, to one degree or another, picked up this design. But Solaris is the first fairly inexpensive car with a beautiful design. But let me return to the essence of the problem. Even at the very beginning on the forumshttp://solaris-club.net/forum/forumdisplay.php?f=10 They began to express their indignation at the suspension, at the beginning I even defended the suspension. But life put everything in its place. When spring came and the road revealed its charms, the first thing I experienced was the weakness of the suspension to breakdown and the front and rear suspensions easily broke through at low speeds. Therefore, we had to constantly control the speed of movement. If for some reason the speed was a little higher, then a strong breakdown followed, especially in the front suspension. Another fact became clear: the stern of the car rocked on the waves. One day, while entering a turn on a wave, I felt the stern slip into a skid. The car spun to the outside of the bend. then he threw it sharply in the other direction and so on up to three times. And the speed was no more than 80 km/h. After this incident, I became afraid to drive fast if there were waves and bumps on the roads. It was interesting to see how classic vases look! overtake easily. And front-wheel drive vehicles generally made overtaking effortless. Less than two months after the purchase, disappointment set in. How can you buy a car for a decent amount of 500 thousand. With an excellent and quite powerful engine, good dynamics and declared speed at 190km h
in reality this is probably under ideal road conditions. So, it turned out that another very unpleasant drawback of the suspension was the inability to keep the car in a straight line in a crosswind; when encountering trucks, the car was thrown along the highway, and I had to constantly steer. At the same time, the speed dropped sharply, it was just really scary and unsafe to drive. At the same time, the forum literally exploded with indignation about the suspension. Neither the plant nor the OD. no one has given a real sober answer to this question. There was no recall company, but most of all, the motto that the Solaris suspension was adapted to Russian roads sounded like a mockery. Many owners quickly sold their cars second-hand in an attempt to hide the real reason for the sale. Many have simply resigned themselves to this problem. I also almost sold the car, but it was my dream and therefore I decided to change the suspension and its operation myself.

When I looked underneath the car I was very surprised. Why did the designers pile the bottom of the shock absorbers towards the beam, moving them away from the wheel axis?
This suspension is compact and its shock absorbers do not occupy a niche in the trunk. But is this good? When the lever arm, spring, and wheel hub mass create inertia capable of swinging the lever.
How will the shock absorber work at this angle?

Z factory shock absorber position, stock position. The photo shows that the wheel axle is far behind the lower shock absorber mount.
As a consequence of this, buildup occurs.

So I started searching for and solving problems with the Solaris suspension. Development, testing of different shock absorber mounting designs, selection and production of springs. Installation of additional bumpers. And finally, installing the stabilizer on the rear suspension. All this took two and a half years. I reflected on all the modernization in a topic on the Hyundai-Solaris Club Russia forum. In the first topic "I am upgrading the Solaris suspension"http://solaris-club.net/forum/showthread.php?t=4183 the rating of the topic was very high, then when the problem only affected the rear suspension, this topic was closed and a new one was started: Adaptation of the Hyundai-Solaris chassis to Russian roadshttp://solaris-club.net/forum/showthread.php?t=6394 where I fully disclosed the progress of research to improve the suspension. I had a great desire to solve the problem and correct the design flaw. And I succeeded.
First, I thoroughly studied the parameters of the factory stock suspension.

And so let's start with the fact that I first changed the angle of the shock absorbers, setting them in a vertical position, and solved the problem of the stern rocking. It stopped.
Next, I repeatedly changed the design of the mounts and created mounts with adjustment for changing the stiffness and length of suspension travel.

Brackets with variable geometry in 4 positions. 1.Comfort 2.Normal 3.Sport 4.Super sport

Justification for moving the lower part of the shock absorbers.
When the shock absorber has a deviation from the vertical position, the load on it increases in direct proportion and the inertial force of movement of the shoulder mass increases in direct proportion.
This is a physical quantity caused by the geometric location of the shock absorber itself. A lot depends on this. If the shock absorber is installed vertically, the suspension travel will decrease, but the inertia forces of the mass and the load on the shock absorber will decrease. The mount, which has 4 positions, gives the car owner the choice to set the required suspension stiffness, thereby customizing the car for themselves. As the angle changes, the behavior of the car on the road, highway and country road changes.
The kinematics of the suspension with inclined shock absorbers, especially from the center of the wheel axis, creates mass on the shoulder, and when moving, mass inertia is created. A shock absorber cannot adequately dampen vibrations unless it is fully clamped. In this case, the load on the silent blocks increases. In fact, shock absorbers dampen a shoulder break by turning out the silent blocks.
The straight shock absorber has a longer stroke, but it completely holds the arm by its edge where the center of the axle is. The shock absorber is easier to hold and compensates for any vibrations, small or large. It works correctly, to a great length. Example Modernized Niva. In front of her was a field whose shock absorbers were tilted, it was jumping quite a bit. On the new car, the shock absorbers are vertical and they have a long stroke, the car really stopped jumping over uneven surfaces, the galloping effect disappeared. The compact suspensions of the Hyundai Hyundai Solaris, Kia Rio, Kia Venga, Kia Cerato previous, Hyundai Elantra new, have similar rear beams and inclined shock absorbers, they all have to varying degrees the effect of galloping, swaying the stern, this is especially evident when loaded condition. Changing the angle changes the car's behavior on the road. Why do you think many have changed shock absorbers more than once! On rigid and semi-rigid ones, in the end the shock absorbers were moved to a more vertical position, because the law of physics works here. It is better to hold the bucket in your hand than on a stick in front of you. Even if you are strong. Then, when carrying a bucket on a stick, it will swing, twisting your arm. In our case, silent blocks. Carrying a bucket in your hand, nothing can be twisted, here everything depends on the strength of the rapist, that is, on the resistance force of the shock absorber. It's a simple law. The one who performs it spends less energy. Failure to comply with the kinematics geometry promises overstressing of the components and poor performance of the suspension.

Justification for replacing springs.

Stock factory springs in the form in which they are installed on the car (let's start with the front ones) have a barrel shape and only 4.7 turns, of which 3 turns are fully functional. And although the designers made full use of the shape of the springs by forcing them to work along their entire length, this turned out to be extremely insufficient. And this problem has not been solved to this day! The spring has stretched coils located far apart from each other. When such a suspension is compressed, the spring rod is subjected to excessive twisting, excessive overstressing of the metal, resulting in lower ductility and, at the same time, elasticity during compression. Such springs very quickly lose their load-resistance properties. they sit down just as quickly, reducing the already small ground clearance.

Front spring 2010-2011

Front spring 2014-2016

The spring itself has a length of 4.7 vics and a rod thickness of 12 mm
Such a spring holds the body, but under an instantaneous load, such as hitting an obstacle, it easily bends like an old spring sofa, hence the breakdown of the suspension, the inability to hold the body normally elastically on uneven surfaces and when exposed to air currents. Thanks to research and testing, I was able to obtain two types of springs capable of performing their functions well within this suspension. These are kit springs"Carrier", "Universal", "Cross", "Nature", "Sport-DS" "Rural option"made from standard rear springs 06 models of Oryol and VAZ production. Having a length from 5.3 to 6.75 turns, depending on the clearance at the request of the customer.

These springs have a cylindrical shape, a rod thickness of 13 mm and with a quantity of 6 turns, they have 5 working turns.
Cylindrical springs along the entire length have equal loading characteristics on the coils, in contrast to barrel-shaped springs, which were invented to save metal.
Barrels have a small diameter at the base and a large diameter at the center. This type of spring works mainly due to its central part. Where the coil decreases in diameter, the spring works much less with equal load per coil. In turn, this is a barrel-shaped spring that is more vulnerable to load and coils of small diameter sag faster over time, reducing ground clearance; another such spring is capable of breaking off on a small coil.
In this case, the cylindrical spring compares favorably in its performance with the stock one; it has a larger number of working turns; when compressed, the resistance increases in direct proportion to the load, preventing breakdown of the suspension. Such a spring with a slightly smaller diameter quickly calms down without phantom vibrations. Therefore, there will be no buildup.
By adding a normal pillow with a bandage to the design instead of the stock rubber band, we get a very good result. Softness + better sound insulation.

And the rack itself with such a spring looks beautiful, the spring sits evenly without distortions and works correctly.

Factory stock rear suspension springs have 6.25 turns of which 4.75 are working turns. The rod thickness is 10.5 mm on 2012 models after the February upgrade to 11 mm. with the same number of turns. Why are there few turns? There is little space for the spring itself due to the compactness of the suspension, to prevent the coils from touching. But is this really an excuse for the end consumer? Especially the first 10.5 mm springs are very weak. Even when the car is lightly loaded, rear suspension breakdowns are a constant occurrence. And if you load it to the maximum, the car will simply knock endlessly with the bump stops, while you can only move very slowly.

Rear springs 2010-2011

Rear springs 2014-2016

Of course, the number of working turns of 4.75 is extremely insufficient. as well as the thickness of the rod itself. The performance of the spring is very similar to the front spring. It is not elastic enough, and with a larger thickness of the rod, it is not flexible enough. Studying these indicators, I came to the conclusion that the best thing that can be installed is prepared VAZ 08 springs with rubber bands from the 06 front suspension on the top and 08 cushions on the bottom. And also in the “Carrier” kit, the rear spring of the VAZ 2106, produced by VAZ, is used. The number of spring turns is from 8 to 8.8 with 6.6-7 working turns. The spring is cylindrical with a smaller diameter than the stock one. but it installs just tightly. It works silently. Has progressive characteristics. At low speed the suspension is very soft. But with an increase in stroke and greater compression of the spring, its resistance sharply increases, thereby preventing the suspension from breaking through. Also, when loading, the depreciation readings remain high. Both an empty and loaded car are equally comfortable. At speed, small things are overcome in flight and large obstacles do not penetrate the suspension; only a slight push that does not affect handling. With these springs, the suspension has less tendency to bounce.

Prepared rear suspension springs without lifting. The thickness of the rod is 11.2 mm; the number of turns is from 8 to 8.8, depending on the rise.
After installing brackets with adjustable shock absorber stiffness, as well as replacing springs, the car is transformed, the suspension becomes elastic but not rigid in its concept.
The car is pleasant to drive and is not afraid of the road. The average speed increases and the control voltage decreases. This is especially noticeable on a long journey.

Another very important improvement in stability is provided by the stabilizer mounted on the rear beam. At the moment, I have developed a complete design of such a thing; I make it from the front stabilizer of a VAZ 2108-2110, it is attached with clamps to the beam with the ends to special fastenings twisted to the spring cup. The stabilizer significantly improves the vehicle's stability on the road when turning and maneuvering. Resistance to side winds and oncoming freight transport increases sharply.

The stabilizer is secured via a rubber bracket. Fastening to the beam using a clamp and rubber bushing.
If the car is equipped with a full set of modernization, it is the king of the road, summer winter autumn, it will never let you down.

Factory upgrade

With the emergence of problems with the rocking of the stern of Solaris, the designers installed stiffer shock absorbers on the rear of the car. The first shock absorbers, the softest, are designated L-000; the second shock absorbers are designated L-001; they are marked with a yellow mark; the shock absorbers are 10% stiffer in compression. This was after the August 2011 modernization.

The rear suspension began to sway less on the waves, but still the vibrations remained as well as the suspension breakdown, and the stability improved only slightly. The same shock absorbers began to be installed on the first Kia Rio models. Moreover, emphasizing that with the KIA-Rio there will be no problems with the suspension. Kia is not Solaris. Although this is not true, the base is absolutely the same. And the problem came to light a little later when the owners tried the car on the move. During tests in the magazine "Behind the Wheel" they complained about the lack of intelligibility of the controls. But it is so, except for the rear shock absorbers, nothing has changed in the design.After further complaints from the consumer, another attempt was made to modernize the suspension of the Solaris and now the Kia Rio. This Modernization is usually called after the February one. As I predicted, the designers took the simple path. The rear shock absorbers were tightened, making them more rigid in compression and tension. Such shock absorbers received the designation L-002 and began to have a green mark on them.

The front shock absorbers were also set to be stiffer in compression. If the first racks had a groove with a groove on which the cushion was placed and did not rotate, then the later racks had a regular thread installed and the cushions simply had a regular hole. Another difference is that if the stand of the first releases was attached to the top with a plate with a thin rubber band that did not touch the body, then the February version already had a thicker rubber band that pressed the plate to the body, holding the stand tightly. In the first versions there was a gap, and when there was a jump or a deep hole, the stand clattered while hanging on the plate. On the other hand, a plate that was not tightly pressed allowed less vibration to be transferred from the engine and transmission to the body. It also had quieter operation of the suspension in normal aisles. The new suspension has become stiffer and noisier than the first two. They also installed rear springs with a larger rod thickness of 11 mm instead of 10.5 on the first models. Considering that the same number of turns remained, the pendant became oak. If the first Solaris could be easily swung by hand, then after February it was simply impossible to push through the rear of the car; even at first the owners boasted about this. But a passenger car is not a UAZ. Rear suspension breakdowns have decreased, the car has become more stable due to greater rigidity. The shock absorbers began to dampen all vibrations. But the fact is that “Solaris and Kia” are fairly light cars, when driving over small uneven surfaces, the suspension practically does not work; depreciation is due to rubber.
Although on the highway at high speed the car began to stand up an order of magnitude better, to the detriment of comfort. There was also added noise from the suspension because now the shock absorbers began to work in compression, resisting the forward shocks on the body. After some time, it turned out that the front suspension was breaking through in almost the same way as on the first models. In windy weather, it is difficult to keep a light vehicle on a given trajectory.

And of course, the experts presented the suspension at its best on the training ground where the tractor will hold the road perfectly at speed. aligned waves, no joints, no small irregularities from which the interior is filled with roar and the fifth point reads the small things. This is especially true on the highway.

Drive along a patched road where there are potholes and bumps, and your rose-colored glasses will quickly come off. The suspension should handle small things well. keeping the lever from breaking down on serious obstacles. a car of this category with such a suspension deserves the best! And I have proven this more than once. By my example and by those who followed my advice. Solaris was labeled as weak in the car's suspension. And an explanation like, what do you want for that kind of money? And everyone fell for it? Doesn't this car deserve better! Is it not possible to bring to mind the chassis in the form in which it already exists? I will say, you can do more than that. And those who have already done this do not worry about it much. No matter how many essentially necessary bells and whistles they put on a car, paying huge sums without changing the essence. After all, a car is, first of all, a movement; this movement must be confident, accurate and predictable. It should give pleasure, so that the owner feels completely confident behind the wheel, so that the car is not a Gorgon jellyfish dancing along the road and is not a stool that shakes out the guts. The car must completely obey the driver, then and only then will it be a safe car. Merging into one with the car, the driver feels the road with his hands, choosing the desired trajectory. Maneuvers, overtaking, rearrangements, everything must take place in flight. So that when performing a maneuver, the driver clearly senses the situation, and at the right moment makes the necessary decision so that his actions do not lead to loss of control. Stability, comfort, load capacity. Here are the main indicators.

07/14/2014 More than three years have passed And nothing has changed. Another attempt at improvement. The front suspension of Solaris and Kia Rio is now equipped with “Reinforced” springs. What is the difference between such modernization? It seemed that an additional 1 mm of rod should make the suspension more dense and resistant to the realities of our roads. Instead of the standard 12 mm and later 12.2 mm, the spring rod became thicker, namely 13 mm. But the shape of the spring remained the same, moreover, the spring was made lower. It is 10 mm lower than the first sample and still has the same 3.5 working turns. But the declared ground clearance of 160mm was preserved.

On the right is a spring from 2011. On the left is a spring from 2014. I removed the cambric at the bottom of the spring. That's the difference.

By strengthening the spring they made it shorter. What's the secret? The suspension parameters remain the same. If the spring of the previous version was more charged at a higher voltage, now, due to the shorter spring, the suspension has the same travel, only it has also become stiffer. The ancestor now reads small things well. The installed cambric at the bottom of the spring, a spring ringing damper, makes the suspension somewhat quieter, but comfort suffers greatly from the rigidity. And the suspension breakdowns remained as they were. After all, miracles do not happen in this suspension stroke; it is impossible to make the suspension both stable and comfortable. Well, if you don’t raise it, thereby adding one and a half to two centimeters of ground clearance, which is so lacking when hitting an obstacle. At one time, your humble servant cut up more than a couple of springs. And I did the same in the stock version with a spring 13 mm thick rod. The suspension is breaking through. The declared 160mm actually leaves 80mm of compression for the suspension)))) And then bang! And at speed, even with the car not loaded, this is a direct breakdown with a blow to the entire body. Just a little bit of 20mm is missing, and then even if there is a breakdown, it will be on a serious obstacle and it will only be a touch and not a blow with a sledgehammer. That’s why all the kits that I offer have a degree of suspension travel reserve for breakdown. from 15 to 28 mm. In this kinematics with these stands, this is the best option. So if you change something, you need to completely rework the suspension kinematics and use struts with a large stroke. But it is not easy and it requires investment. The latest improvement is a step back. A shorter spring does not solve the problem, and stability worsens because when the strut is decompressed, the top turns out empty, hence the roll when turning, and in windy weather the straightness is unstable. Well, let's improve the suspension ourselves. Moreover, this is not difficult to do. Otherwise, both Solaris and Kia Rio are very good cars, many components last quite a long time, but more on that in another section. Something like that.

Is there an alternative? Yes she is! And it is time-tested by many months of testing.

What is the rear suspension of the Hyundai Solaris? The question is quite interesting. To understand the principle of its operation, you need to understand the device. This article is devoted to this issue. After familiarizing yourself with it, you may learn how to disassemble the car suspension yourself.

Components

The rear suspension allows the car to move smoothly and softens road imperfections. It must be admitted that the design of the front suspension is more complicated than the rear one, however, in this case, you also need to figure it out. Its design is as follows:

The main element is the beam.
Lever attachment.
A device that acts as a stopper for a spring during compression.
Shock absorber.
Lever arm.
Hub assembly.
Pad located underneath the spring.
The spring itself.
Lining located on top.
Buffer washer.
Thrust element.

The Hyundai Solaris uses a semi-independent suspension, with an elastic beam type, as well as a spring suspension with installed shock absorbers.

The levers are equipped with edges on which the wheel axles, individual brake elements and support clamps are directly attached. In front, the levers have welded bushings in which silent blocks are located, which act as a connecting part between the body and the beam. As for elastic parts, in this case their role is played by springs.

In the Solaris suspension, it is worth highlighting the fact that the spring rests directly through the gaskets of the rubber sample. Another characteristic feature of this car is the smaller diameter of the lower turn compared to the uppermost one.

In any suspension, springs are usually divided by class, depending on the stiffness parameters. To determine the class, the specific color of the part is used. Naturally, on both sides you need to use springs of the same class and the same model. During replacement, it is not recommended to install elements different from those that were installed previously. The role of the limiter during compression is performed by the buffers listed in the list under No. 3. They are installed in the middle of the upper support.

Shock absorbers have special eyes both below and above. Hinges made of rubber and metal are pressed into them. Inside the hinge there is a bushing through which a bolt is inserted, allowing you to attach the shock absorber to the body. The front suspension of the Hyundai Solaris is equipped with a bearing located in the hub unit. The advantage is that there is no need to regularly add lubricant to it. If the device fails, it is simply replaced.

The rear wheels are always in one position, which is provided for by the design - there is no way to regulate them. They are only checked with specialized equipment in order to identify discrepancies with the norm. In a situation where the difference with the nominal values is too large, you will have to perform diagnostics of the working elements.

Additional Information

Based on the data provided, one can guess that dismantling and installing individual suspension parts in a Hyundai should not cause difficulties. The main thing is to have the proper equipment.

Today many craftsmen are engaged modification of the suspension. Such work involves installing new parts of higher quality. They often install reinforced springs, based on the fact that domestic roads cannot boast of high quality.

Why do you need a suspension upgrade? For more than five years now they have been producing a car that has gained enormous popularity among car owners. This is a Hyundai Solaris

and the no less popular Kia Rio.

Need stability on the highway? No problem. Shouldn't there be any swing? This is solvable. Is the suspension flimsy and breaks? And there is a solution. Small things hammering the fifth point? This can be solved and noise from road unevenness can be reduced. This can all be solved. And your humble servant decided this for himself. I studied and studied this with interest for almost three years. And he came up with a certain concept in which it is possible to improve the suspension of this platform, not in mock-up slang in words, but in real deeds, with real developments and tests. Testing time and reviews from owners of those who decided to redo the suspension. More than three years have passed. The year is 2015. Has the problem been resolved at the plant so far? Formally yes! The stern rocking was removed and the suspension was strengthened. But there is no need to delude yourself about this. The problem is still not resolved. Why do I say that the previous changes had little result and the latest reincarnation completely worsened the results. And this is not an unfounded statement, but the result of working with correspondence. Real reviews from owners on websites, letters that I receive in large numbers have similar complaints about the suspension. The main thing is insufficient stability at speeds of more than 100 km/h. Control is not clear enough when performing maneuvers. Unpredictability of car behavior on uneven surfaces. Weak suspension to breakdown. There is a thread about this on the forum I think that my Hyundai Solaris has a bad suspension! http://solaris-club.net/forum/showthread.php?t=6178 and for the sake of fairness I will say that there is another topic I think my Solaris has a good suspension! http://solaris-club.net/forum/showthread.php?t=5498 But there are 127 entries in the first topic and 123 in the second, but views in the first are 56 thousand. In the second, 36 thousand. This suggests that this problem is more likely there is something not. Moreover, not everyone wants to simply and truthfully write about their car because so much money was given away. And in terms of the number of views, the first one is one and a half times higher. This indicates that there is a problem. Another proof that there is a problem Interest in the topic On the website "Нуundai Solari-Club Russia" Adaptation of the Solaris chassis to Russian roads http://solaris-club.net/forum/showthread.php?t=6394 over 3000 posts and over 450,000 views! And also a topic on the website "Kia Rio-Club Russia" I'm redoing the suspension http://kia-rio.net/forum/showthread.php?t=2508. Of course, you can ignore the problem and you can have what you have. But don’t you want to have the best if there is such an opportunity?

And so let's start with what happened. It all started with Solaris from the first batch produced in 2010-2012. The car is very good, beautiful, reliable and simple, inexpensive to maintain.

I have a car from this lot. Even during the purchase and transfer, I noticed that the stern of the Solaris gallops on uneven surfaces and sways especially unpleasantly on the waves. But the car is new, rose-colored glasses and this is the first foreign car. It was significantly different in the flow of cars with its flowing lines; now many manufacturers have, to one degree or another, picked up this design. But Solaris is the first fairly inexpensive car with a beautiful design. But let me return to the essence of the problem. Even at the very beginning, on the forums http://solaris-club.net/forum/forumdisplay.php?f=10 they began to express their indignation at the suspension, at the beginning I even defended the suspension. But life put everything in its place. When spring came and the road revealed its charms, the first thing I experienced was the weakness of the suspension to breakdown and the front and rear suspensions easily broke through at low speeds. Therefore, we had to constantly control the speed of movement. If for some reason the speed was a little higher, then a strong breakdown followed, especially in the front suspension. Another fact became clear: the stern of the car rocked on the waves. One day, while entering a turn on a wave, I felt the stern slip into a skid. The car spun to the outside of the bend. then he threw it sharply in the other direction and so on up to three times. And the speed was no more than 80 km/h. After this incident, I became afraid to drive fast if there were waves and bumps on the roads. It was interesting to see how classic vases look! overtake easily. And front-wheel drive vehicles generally made overtaking effortless. Less than two months after the purchase, disappointment set in. How can you buy a car for a decent amount of 500 thousand. With an excellent and fairly powerful engine, good dynamics and a stated speed of 190 km h

in reality this is probably under ideal road conditions. So, it turned out that another very unpleasant drawback of the suspension was the inability to keep the car in a straight line in a crosswind; when encountering trucks, the car was thrown along the highway, and I had to constantly steer. At the same time, the speed dropped sharply, it was just really scary and unsafe to drive. At the same time, the forum literally exploded with indignation about the suspension. Neither the plant nor the OD. no one has given a real sober answer to this question. There was no recall company, but most of all, the motto that the Solaris suspension was adapted to Russian roads sounded like a mockery. Many owners quickly sold their cars second-hand in an attempt to hide the real reason for the sale. Many have simply resigned themselves to this problem. I also almost sold the car, but it was my dream and therefore I decided to change the suspension and its operation myself.

When I looked underneath the car I was very surprised. Why did the designers pile the bottom of the shock absorbers towards the beam, moving them away from the wheel axis?

This suspension is compact and its shock absorbers do not occupy a niche in the trunk. But is this good? When the lever arm, spring, and wheel hub mass create inertia capable of swinging the lever.

How will the shock absorber work at this angle?

As a consequence of this, buildup occurs.

First, I thoroughly studied the parameters of the factory stock suspension.

When the shock absorber has a deviation from the vertical position, the load on it increases in direct proportion and the inertial force of movement of the shoulder mass increases in direct proportion.

This is a physical quantity caused by the geometric location of the shock absorber itself. A lot depends on this. If the shock absorber is installed vertically, the suspension travel will decrease, but the inertia forces of the mass and the load on the shock absorber will decrease. The mount, which has 4 positions, gives the car owner the choice to set the required suspension stiffness, thereby customizing the car for themselves. As the angle changes, the behavior of the car on the road, highway and country road changes.

The kinematics of the suspension with inclined shock absorbers, especially from the center of the wheel axis, creates mass on the shoulder, and when moving, mass inertia is created. A shock absorber cannot adequately dampen vibrations unless it is fully clamped. In this case, the load on the silent blocks increases. In fact, shock absorbers dampen a shoulder break by turning out the silent blocks.

The straight shock absorber has a longer stroke, but it completely holds the arm by its edge where the center of the axle is. The shock absorber is easier to hold and compensates for any vibrations, small or large. It works correctly, to a great length. Example Modernized Niva. In front of her was a field whose shock absorbers were tilted, it was jumping quite a bit. On the new car, the shock absorbers are vertical and they have a long stroke, the car really stopped jumping over uneven surfaces, the galloping effect disappeared. The compact suspensions of the Hyundai Hyundai Solaris, Kia Rio, Kia Venga, Kia Cerato previous, Hyundai Elantra new, have similar rear beams and inclined shock absorbers, they all have to varying degrees the effect of galloping, swaying the stern, this is especially evident when loaded condition. Changing the angle changes the car's behavior on the road. Why do you think many have changed shock absorbers more than once! On rigid and semi-rigid ones, in the end the shock absorbers were moved to a more vertical position, because the law of physics works here. It is better to hold the bucket in your hand than on a stick in front of you. Even if you are strong. Then, when carrying a bucket on a stick, it will swing, twisting your arm. In our case, silent blocks. Carrying a bucket in your hand, nothing can be twisted, here everything depends on the strength of the rapist, that is, on the resistance force of the shock absorber. It's a simple law. The one who performs it spends less energy. Failure to comply with the kinematics geometry promises overstressing of the components and poor performance of the suspension.

Front spring 2010-2011

Front spring 2014-2016

The spring itself has a length of 4.7 vics and a rod thickness of 12 mm

Such a spring holds the body, but under an instantaneous load, such as hitting an obstacle, it easily bends like an old spring sofa, hence the breakdown of the suspension, the inability to hold the body normally elastically on uneven surfaces and when exposed to air currents. Thanks to research and testing, I was able to obtain two types of springs capable of performing their functions well within this suspension. These are the springs of the “Carrier”, “Universal”, “Cross”, “Nature”, “Sport-DS” and “Rural Option” sets, made from standard rear springs 06 models of Oryol and VAZ production. Having a length from 5.3 to 6.75 turns, depending on the clearance at the request of the customer.

Cylindrical springs along the entire length have equal loading characteristics on the coils, in contrast to barrel-shaped springs, which were invented to save metal.

Barrels have a small diameter at the base and a large diameter at the center. This type of spring works mainly due to its central part. Where the coil decreases in diameter, the spring works much less with equal load per coil. In turn, this is a barrel-shaped spring that is more vulnerable to load and coils of small diameter sag faster over time, reducing ground clearance; another such spring is capable of breaking off on a small coil.

In this case, the cylindrical spring compares favorably in its performance with the stock one; it has a larger number of working turns; when compressed, the resistance increases in direct proportion to the load, preventing breakdown of the suspension. Such a spring with a slightly smaller diameter quickly calms down without phantom vibrations. Therefore, there will be no buildup.

By adding a normal pillow with a bandage to the design instead of the stock rubber band, we get a very good result. Softness + better sound insulation.

Rear springs 2010-2011

Rear springs 2014-2016

Prepared rear suspension springs without lifting. The thickness of the rod is 11.2 mm; the number of turns is from 8 to 8.8, depending on the rise.

After installing brackets with adjustable shock absorber stiffness, as well as replacing springs, the car is transformed, the suspension becomes elastic but not rigid in its concept.

The car is pleasant to drive and is not afraid of the road. The average speed increases and the control voltage decreases. This is especially noticeable on a long journey.

The stabilizer is secured via a rubber bracket. Fastening to the beam using a clamp and rubber bushing.

If the car is equipped with a full set of modernization, it is the king of the road, summer winter autumn, it will never let you down.

The rear suspension began to sway less on the waves, but still the vibrations remained as well as the suspension breakdown, and the stability improved only slightly. The same shock absorbers began to be installed on the first Kia Rio models. Moreover, emphasizing that with the KIA-Rio there will be no problems with the suspension. Kia is not Solaris. Although this is not true, the base is absolutely the same. And the problem came to light a little later when the owners tried the car on the move. During tests in the magazine "Behind the Wheel" they complained about the lack of intelligibility of the controls. But it is so, except for the rear shock absorbers, nothing has changed in the design. After further complaints from the consumer, another attempt was made to modernize the suspension of the Solaris and now the Kia Rio. This Modernization is usually called after the February one. As I predicted, the designers took the simple path. The rear shock absorbers were tightened, making them more rigid in compression and tension. Such shock absorbers received the designation L-002 and began to have a green mark on them.

Although on the highway at high speed the car began to stand up an order of magnitude better, to the detriment of comfort. There was also added noise from the suspension because now the shock absorbers began to work in compression, resisting the forward shocks on the body. After some time, it turned out that the front suspension was breaking through in almost the same way as on the first models. In windy weather, it is difficult to keep a light vehicle on a given trajectory.

07/14/2014 More than three years have passed and things are still there. Another attempt at improvement. The front suspension of Solaris and Kia Rio is now equipped with “Reinforced” springs. What is the difference between such modernization? It seemed that an additional 1 mm of rod should make the suspension more dense and resistant to the realities of our roads. Instead of the standard 12 mm and later 12.2 mm, the spring rod became thicker, namely 13 mm. But the shape of the spring remained the same, moreover, the spring was made lower. It is 10 mm lower than the first sample and still has the same 3.5 working turns. But the declared ground clearance of 160mm was preserved.

On the right is a spring from 2011. On the left is a spring from 2014. I removed the cambric at the bottom of the spring. That's the difference.

Since 2014, Hyundai has launched Solaris, which has undergone major restyling. The vehicle received the greatest update in the technical part, and in particular in the front suspension. Thanks to the updating of engines, suspension, transmission and other components, Hyundai Solaris began to be considered one of the most popular cars in the price segment for such indicators as:

quality of material;
passenger safety;
controllability.

The Hyundai Solaris car is a long-term project of Korean engineers, which has received many flattering reviews throughout its existence. However, the manufacturer's transition to new equipment made it possible to present a completely different Solaris to the world. The first car was characterized by original features that indicated the designer's ability to think outside the box.

The new product captivated many with the performance of its power units, as a result of which no one paid much attention to the presence of any shortcomings in the operation of the vehicle. However, over time, many car owners became less happy and satisfied with the use of the car and demanded that management carry out improvements.

The front suspension of the Hyundai Solaris received most of the complaints. According to car owners, it could only work well on perfectly smooth surfaces. If you had to travel across the expanses of Russia, the driver was faced with many problems with the suspension.

The company's management does an excellent job and gladly takes into account the wishes of its clients. As a result, with each restyling of the car, the manufacturer tries to remove all the shortcomings.

In 2014, the company released a car for sale in which the main focus of changes was on the suspension. The engineers announced their results well in advance of the release of Solaris. Many car enthusiasts were pleased with this news and everyone began to look forward to the official release of the car. The stated data from the company turned out to be true: in addition to some changes in the design of the car’s exterior, the design of the front and rear suspensions was changed, and a new line of gearboxes also appeared. Thanks to these changes, Solaris has become much more practical on the road.

Hyundai's front suspension was made in the form of a unique design using struts from MacPherson. The type of suspension is independent, due to which it provides:

excellent grip on the road surface;
excellent handling both when cornering and on flat sections of the route;
high reliability and traffic safety.

The car's dynamism on the road is achieved through the use of new energy-intensive shock absorbers by the company's engineers. The springs, along with the shock absorbers, have received a greater degree of rigidity.

As a result, we managed to get a car that perfectly overcomes bad road sections. The new version of the car, unlike the previous model, moves smoothly and quietly, easily avoiding various bumps in the road surface. A revision of the car's suspension design made it possible to reduce the previously developing buildup.

Despite the excellent assembly of the car, the most susceptible to repair elements are still the front suspension arms and shock absorbers. If extraneous knocking noises appear while driving or uneven tire wear occurs, it is necessary to repair the front suspension of the Hyundai Solaris. You can replace a bent or broken front suspension arm yourself in the garage. To do this, you need to stock up on a set of tools and, accordingly, a new part. The procedure for replacing the lever is as follows:

raise the front;
place a safety support;
remove the wheel;
then you need to remove the ball pin nut;
the finger is pressed out using a puller;
the lever is disconnected from the steering knuckle;
Next, you need to remove the nut of the front bolt securing the lever to the cross member;
after removing the nut, it is necessary to remove the bolt from the silent block;
then also remove the rear fastening bolt and nut;
then the lever assembly with the ball is removed;
Installation of the part is carried out in the reverse order.

After replacing the lever, be sure to set the wheel angle at a service station. If, after replacing the lever, the knocking does not stop, you need to check the front suspension shock absorber. To remove it you must:

it is necessary to place anti-roll bars under the rear wheels of the car;
loosen the front wheel nuts;
Under the hood, remove the protective caps on the shock absorber fastening nuts;
loosen the nut - this is done with two keys, one holds the rod from turning, the second key unscrews the nut itself;
remove the top nut;
remove the thrust washer;
lift the front end and remove the wheel.

On a note! When removing the shock absorber on the right, you first need to unscrew the bolt of the wheel rotation sensor bracket, then remove the wires. If the car has an ABS system, then sensors are installed on both sides.

then the nut of the upper stabilizer hinge is unscrewed and the pin is removed;

Next, remove the bolts securing the strut to the knuckle;

after removing the bolts from the holes, the fist is moved to the side and the stand assembly is removed;

then you need to compress the spring using a clamp and unscrew the rod nut;

then the support bearing is removed;

the support cups are removed from the rod;

then the spring and protective rubber are removed;

if the rack has various defects in the form of streaks or cracks, it must be replaced;

Before installing the shock absorber, it must be bled to ensure proper operation. Pump until the rod is completely lowered and raised. There should be no failures;

assembly is carried out in reverse order. It should be noted that the spring is fixed at its end in a special seat.

The front shock absorbers must be replaced in pairs. After the repair, you will need to adjust the wheel alignment.

The restyling carried out in 2014 gave Solaris many advantages over its predecessors. However, not every car enthusiast was pleased with the quality of the suspension. As a result of this, many car owners began to use all sorts of independent modernization methods, as a result of which the front suspension of the Hyundai Solaris is slightly changed. Tuning it consists of the following methods.

To upgrade, it is necessary to replace the front shock absorbers. Drivers must install a KIA Soul part instead of the original one. This method is the most popular.

Initially it is necessary to jack up the car;
then the wheel is removed;
the standard shock absorber is removed;
the shock absorber from Kia is slightly longer, so it is necessary to trim it in line with the original part of the car;
then the new shock absorber is pumped (4 passes);
car assembly.

Thanks to this tuning method, it is possible to achieve high rigidity on bad roads; in addition, the car acquires improved qualities in the form of stability and controllability.

Another method of modernization is the use of purchased elements. The unique design is called a cube suspension. Despite the little popularity of the pendant, many speak flatteringly about its performance. The suspension is based on the use of front springs, the strength of which is much greater than conventional ones. Thanks to this, the car becomes even more dynamic and controllable.

The right to choose remains with the driver. It is he who decides whether to upgrade the suspension and get a completely different car in terms of characteristics, or save money and spend money on repairs.

Reproduction of materials is permitted only with the written agreement of the owner User Agreement | Privacy Policy

Hyundai Solaris is a fairly new car that appeared on our automobile market in 2011. Korean designers did a good job on it. The cars are still under warranty, so few people have done tuning of Hyundai Solaris cars. True, the 2011 models have one significant drawback - the suspension is too soft, due to which the car’s behavior becomes unpredictable at high speeds.

In order to make the Solaris suspension more rigid, you can go in two ways. The first is the most expensive and most costly. To do this, go to a tuning studio or car service center, order a new suspension and, after an agreed time, pick up the car with a new sports suspension installed. The second way is less expensive - installing sawn springs from a VAZ: in front are “classic” rear ones, in the back are from a VAZ 2110.

The front springs from above need to be slightly bent inward, since their diameter is larger than the diameter of the support cup. Next, it remains to choose how much to cut the springs (and they will have to be cut in any case, at least by half a turn - otherwise they won’t fit). But the most pleasant option, which does not affect the suspension design (and, accordingly, the warranty), is to install air bags inside the springs.

Using a compressor or hand pump, the cushions are inflated to the required pressure and make the suspension stiffer at the same height. The cushions act as restraints, eliminating breakdowns. Thus, the suspension becomes more collected.

Another advantage of pneumatic cylinders is the ability to quickly adjust the rigidity, for example, when transporting goods. The optimal pressure for a three-liter pillow is 0.5 bar. Therefore, if you decide to get this device, then do not forget about a pressure gauge with a division value of no more than 0.1 bar.

The most popular and trusted manufacturer of air suspensions is the American company Air Lift. Such tuning of Hyundai Solaris cars in the CIS costs about 200-220 dollars. The only disadvantage of air springs is that they can only be installed inside the springs, that is, at the rear (Solaris has struts at the front). But this is not scary, because the engine and transmission are located in front, which means the front itself is stiffer.

The rest is only light styling at the request of the owner. To add originality, you can attach a spoiler or illumination of the underbody and wheels. You can decorate your car with images applied in different ways - for example, airbrushing with film by contacting a specialized studio. The pleasure is not cheap, but they will offer a wide variety of design options and select a color scheme specifically for your car. You can order full-color printing on film, and if you get tired of the design or fade, it can be removed without any problems.

In tuning stores you can purchase many different accessories for the Hyundai Solaris, which is a version of the well-known Accent. One of the most common proposals is a modified radiator grille. Moreover, you can find several options at once, among which there are versions with daytime running lights, chrome elements or without them.

If the goal is to make the Solaris silhouette more rapid, then various aerodynamic elements are suitable for this. This is, first of all, a spoiler and body kit. There are many options, and everyone has the opportunity to choose a design to their taste.

Factory elements that improve the aerodynamics of the car are offered for cars manufactured starting from 2010.

External lighting fixtures of the Hyundai Solaris can be modified with LED tuning. This is done not so much for practice as for beauty. For Solaris, the market offers a considerable amount of alternative optics with LEDs, including models with full LED light.

Having taken a ride in the Solaris cabin, an inexperienced driver may be quite satisfied with the sound comfort, but for those who have something to compare with, the sound insulation of this car is unlikely to seem ideal. Fortunately, the matter can be fixed. Various tuning companies offer ready-made kits for sound insulation of Solaris. Using a special material, the interior of the cabin is additionally insulated from:

Wheel tuning can transform almost any car. And Hyundai Solaris was no exception. Modern alloy wheels are suitable for this compact car. If finances allow, then it is better to take forged ones rather than cast ones. If you still decide to save money and go with casting, it is recommended to purchase a new set, since used discs may have internal cracks, which is unsafe.

Today, many car enthusiasts focus not so much on external, but on internal tuning. It's about tailoring the car's interior to your individual concept of comfort. The easiest way is to contact a tuning company, whose designers will develop a project for a new interior, and the owner will be able to make his own changes to it.

Internal tuning usually begins with reupholstering the interior. You can use different materials, for example, natural or so-called eco-leather, or combinations of both. But whatever materials are chosen, they must be wear-resistant. You cannot use delicate types of leather or low-quality leatherette, as such finishes wear out very quickly and lose their appearance.

The stock console and dashboard can be replaced with textured versions. The choice is large - from carbon fiber to exotic leather and wood. The center of the interior composition is the steering wheel, the finishing of which is given a lot of attention. It is possible to install a steering wheel cover equipped with functional buttons.

Hyundai Solaris is one of those cars that provide the widest field for tuning. This car can be modified beyond recognition. Solaris is a real find for people whose hobby is tuning. At the same time, owners of this car can, with minimal modifications, significantly increase comfort and get more driving pleasure.

In conclusion, I would like to wish all Solaris owners creative success on the path to improving their cars. There is no need to rush into choosing certain elements. First, you should take a look at the entire range of what is available, get acquainted with already implemented projects, and only then finally decide on the future design.

Interesting video: personal experience of tuning Hyundai Solaris

Elantra is a car with virtually no flaws. Reliable, spacious, economical and quite playful. The owners of these cars are quite satisfied with them, n.

Tussan is a popular Korean middle-class crossover. It is the “younger brother” of Santa Fe, from which it inherited many features. Lower Art.

At first glance, the appearance of the Hyundai Accent creates the impression of kindness and naivety. Wide-open “eyes” of the headlights, a good-natured “smile” of the bumper, pla.

S-time: 14:46:41 | Tolyatti

About painting, straightening and polishing cars

158 ..

Checking the technical condition of the front suspension parts on a car - Hyundai Solaris

Carry out the check in the engine compartment and from below the car mounted on an inspection ditch or supports (with the front wheels hanging out). To prevent accidental starting of the engine, remove the key from the ignition switch.

During each maintenance and repair, it is necessary to check the condition of the protective covers of the suspension ball joints; there should be no mechanical damage on the covers.

Find out if there are any cracks or traces of contact with road obstacles or the body on the suspension parts, deformation of the arms, braces, stabilizer bars and their struts, body front parts in the places where the suspension units and parts are attached.

Check the condition of the rubber-to-metal joints, rubber cushions, suspension ball joints and the condition of the upper supports of the telescopic suspension struts.

Rubber-metal hinges and rubber cushions must be replaced in case of ruptures and one-sided bulging of rubber, as well as when their end surfaces are trimmed.

Suspensions on rubber parts are not allowed:

signs of rubber aging;
mechanical damage;

Pay special attention to mechanical damage (deformations, cracks, traces of contact with road obstacles, etc.) of suspension elements, especially levers.

1. In the engine compartment, remove the cap of the shock absorber strut upper mounting nut...

2. ...and check the tightness of the shock absorber strut upper mounting nut.

3. Check the condition of the protective covers of the ball joints. If the covers are damaged, replace them.

4. Check the ball joints for play. To do this, insert a mounting blade between the steering knuckle and the suspension arm and, leaning on the lever, try to swing the steering knuckle.

5. If the ball joints are in good condition, rock the wheels in a vertical plane and make sure there is no play in the bearings. If there is play, replace the bearings.

HELPFUL ADVICE

When the front wheel is suspended, it is difficult to discern play in the wheel bearings and ball joints. Ask an assistant to press the brake pedal: if you feel play in this case, then the ball joints are faulty.

6. Check for play in the silent blocks securing the lever to the front suspension cross member.

7. To do this, insert a mounting spudger or a large screwdriver between the lever and the cross member near the front silent block and try to rock the lever.

8. Check the rear silent block in the same way. If there is significant play even in one of the silent blocks, replace the front suspension arm.

9. Check the tightness of the upper...

10. ...and the lower nuts of the ball joint pins of the anti-roll bar struts.

11. Check for play in the ball joints of the anti-roll bar struts. Replace the rack whose hinges have noticeable play.

Since 2014, Hyundai has launched the Solaris, which has suffered serious damage. The vehicle received the greatest update in the technical part, and in particular in the front suspension. Thanks to the update of engines, suspension, transmission and other components, Hyundai Solaris began to be considered one of the most popular cars in the price segment for such indicators as:

quality of material;
passenger safety;
controllability.

Suspension features

The car is a long-term project of Korean engineers, which has received many flattering reviews throughout its existence. However, the manufacturer's transition to new equipment made it possible to present a completely different Solaris to the world. The first car was characterized by original features that indicated the designer's ability to think outside the box.

What have manufacturers changed?

In 2014, the company released a car for sale in which the main focus of changes was on the suspension. The engineers announced their results well in advance of the release of Solaris. Many car enthusiasts were pleased with this news and everyone began to look forward to the official release of the car. The stated data from the company turned out to be true: in addition to some of the car, the design of the front and rear suspensions was changed, and a new line of gearboxes also appeared. Thanks to these changes, Solaris has become much more practical on the road.

Hyundai's front suspension was made in the form of a unique design using struts from MacPherson. The type of suspension is independent, due to which it provides:

excellent grip on the road surface;
excellent handling both when cornering and on flat sections of the route;
high reliability and traffic safety.

Main types of suspension repairs

raise the front;
place a safety support;
remove the wheel;
then you need to remove the ball pin nut;
the finger is pressed out using a puller;
the lever is disconnected from the steering knuckle;
Next, you need to remove the nut of the front bolt securing the lever to the cross member;
after removing the nut, it is necessary to remove the bolt from the silent block;
then also remove the rear fastening bolt and nut;
then the lever assembly with the ball is removed;
Installation of the part is carried out in the reverse order.

After replacing the lever, be sure to set the wheel angle to . If, after replacing the lever, the knocking does not stop, you need to check the front suspension shock absorber. To remove it you must:

it is necessary to place anti-roll bars under the rear wheels of the car;
loosen the front wheel nuts;
Under the hood, remove the protective caps on the shock absorber fastening nuts;
loosen the nut - this is done with two keys, one holds the rod from turning, the second key unscrews the nut itself;
remove the top nut;
remove the thrust washer;
lift the front end and remove the wheel.

then the nut of the upper stabilizer hinge is unscrewed and the pin is removed;
Next, remove the bolts securing the strut to the knuckle;
after removing the bolts from the holes, the fist is moved to the side and the stand assembly is removed;
then you need to compress the spring using a clamp and unscrew the rod nut;
then the support bearing is removed;
the support cups are removed from the rod;
then the spring and protective rubber are removed;
if the rack has various defects in the form of streaks or cracks, it must be replaced;
Before installing the shock absorber, it must be bled to ensure proper operation. Pump until the rod is completely lowered and raised. There should be no failures;
assembly is carried out in reverse order. It should be noted that the spring is fixed at its end in a special seat.

The front shock absorbers must be replaced in pairs. After the repair, you will need to adjust the wheel alignment.

DIY front suspension upgrade

The restyling carried out in 2014 gave Solaris many advantages over its predecessors. However, not every car enthusiast was pleased. As a result of this, many car owners began to use all sorts of independent modernization methods, as a result of which the front suspension of the Hyundai Solaris is slightly changed. Tuning it consists of the following methods.

To upgrade, it is necessary to replace the front shock absorbers. Drivers must install a KIA Soul part instead of the original one. This method is the most popular.

Initially it is necessary to jack up the car;
then the wheel is removed;
the standard shock absorber is removed;
the shock absorber from Kia is slightly longer, so it is necessary to trim it in line with the original part of the car;
then the new shock absorber is pumped (4 passes);
car assembly.

Thanks to this tuning method, it is possible to achieve high rigidity on bad roads; in addition, the car acquires improved qualities in the form of stability and controllability.

What military ranks were there in the Tsarist Army of Russia?

Osho Chakra Singing (Sounds of the Chakras, Chakra Sounds Meditation) Mantras for the chakras

Meditation on sound in space

Test your level of awareness

Solaris front suspension detailed diagram. Checking the technical condition of the front suspension parts on a car - Hyundai Solaris