Nissan Almera Classic is a compromise car with a decent set of advantages. The car looks stylish and presentable, but at the same time belongs to the budget class. The sedan has a well-studied design that has stood the test of time. Long-term testing of the Almera Classic in harsh conditions has shown that the engine of this car works well in regions with difficult climates. To extend the service life of such a reliable motor, it is necessary to fill it only with high-quality oil. This is the primary task of car maintenance - for those who repair the car on their own, not wanting to use the services of Nissan branded dealerships. In this article, we will look in detail at what you need to pay attention to when choosing engine oil for the Nissan Almera Classic.
According to official data, the recommended service life of engine oil is 60 thousand km. Naturally, this recommendation is only relevant for European countries with a favorable climate and ideal road conditions. In Russia, the climate is more severe, and therefore the requirements for oil changes are more stringent. Experienced owners of Nissan Almera Classic advise changing the fluid no later than after 30 thousand km.
What kind of oil to fill
When choosing the right oil, you should follow the manufacturer’s recommendations. Branded and certified oils should be used that meet the parameters specified in the user manual. For example, among the important parameters it is necessary to note the viscosity class - say, 5W30 and 5W40. The degree of viscosity affects the stability of the lubricating properties of the oil at certain ambient temperatures.
How much to fill
A standard package of branded oil for Nissan Almera Classic usually contains about 4 liters of liquid, which in most cases is enough for one-time use.
It is not necessary to buy the original oil, because there are most analogues that also meet the required standards. Among them are the following oils:
- Mobil 1 5W40, 5W30
- Total NFC 5W-30
- Petro-Canada 5W-30
In addition, you will also need a branded Mann W610/3 oil filter. The filter in the Nissan Almera Classic is considered disposable and is replaced every time the oil is measured.
Change of oil
The chemical composition of lubricating fluids does not need to be studied before a scheduled oil change. It is enough to familiarize yourself with the manual for the car. In this documentation, the manufacturer describes the parameters of the recommended engine oil for Nissan Almera.
Nissan Almera Classic B10 2006-2012
Car engines QG 15DE 1.5 l and QG 16DE 1.6 running on gasoline.
If we look at the operating instructions for the Nissan Almera, the car manufacturer recommends using lubricants that meet the requirements:
- original Nissan oils;
- in accordance with API classification - oil type SH, SJ or SL;
- according to the ILSAC standard - GF-3;
- the viscosity of the lubricant is selected according to scheme 1;
- The approximate volume of oil for replacement, taking into account the oil filter, is 2.7 l (without filter - 2.5 l).
The approximate volume of motor oil is calculated based on the drained lubricant, excluding the lubricant remaining in the engine after draining.
Scheme 1. Dependence of viscosity parameters of motor oil on ambient temperature. According to Scheme 1, you need to use motor lubricants:
- if the temperature is from -30°C (or less) to +30°C (and above), pour 5w - 20,
- at temperature conditions from -30°C to +30°C (and above) fill in 5w - 30;
- if the thermometer shows from -20°C (or less) to +30°C (and above), pour 10w - 30; 10w - 40 (7.5w - 30);
- in the temperature range from -10°C to +30°C (or more) use 20w - 40;
- at temperatures from -10°C to +25°C, fill in 20w - 20;
- from 0°C to +30°C (or more) SAE 30 is used.
Nissan Almera N16 2000 - 2006
Gasoline power units QG15DE 1.5 l and QG18DE 1.8 l.
- original Nissan lubricants;
- according to API classification - oil type SH, SJ or SG (use of API - CG-4 is prohibited);
- according to the ILSAC standard - GF-I, GF-II, GF-III;
- ACEA quality class - 96-A2;
- the viscosity of the lubricant is selected according to scheme 2;
- The approximate volume of engine oil for replacement including the oil filter is 2.7 l (without filter - 2.5 l).
Scheme 2. Selection of engine fluid viscosity depending on the temperature outside the car. According to diagram 2, the manufacturer recommends pouring:
- under temperature conditions from -30°C (or less) to -10°C, pour 5w - 20 (this oil is not recommended for use if the machine is often operated at high speeds);
- at temperatures from -30°C (or less) to +15°C, fill in 5w - 30 (car oil helps reduce fuel mixture consumption by the car);
- in the temperature range from -20°C to +15°C, pour SAE 10w;
- if the thermometer shows from -20°C to +40°C (or more), use 10w - 30; 10w - 40; 10w - 50; 15w - 40; 15w - 50;
- if the thermometer shows from -10°C to +40°C (or more), use 20w - 20; 20w - 40; 20w - 50.
It is better to use 5w - 30 lubricant.
Nissan Almera G15 from 2012
According to the manual, it is necessary to use lubricants that meet the requirements:
- Nissan branded motor fluids;
- ACEA quality class - A1, A3 or A5
- according to API classification -SL or SM;
- the viscosity parameters of motor fluids are selected according to scheme 3;
- The approximate volume of oil for replacement is 4.8 liters (including the oil filter) and 4.7 liters (excluding the filter device).
Scheme 3. Selection of viscosity according to the temperature of the region in which the car will be operated. According to diagram 3, it is necessary to fill in motor fluids:
- in the temperature range from -30°C to +40°C (and above) fill in 0w - 30, 0w - 40;
- if the thermometer shows from -25°C to +40°C (or more) use 5w - 30, 5w - 40;
- when the thermometer readings are from -25°C to +40°C, pour 10w - 40.
It is preferable to use 5w - 30 oil.
Conclusion
The recommended engine oil for Nissan Almera is capable of filling gaps in friction pairs of a certain type of engine to protect the engine from abrasion and overheating. Filling with thicker or thinner motor oil will worsen the performance characteristics of the power unit and lead to its breakdown.
Manufacturers of lubricants use various lubricant bases (synthetic, semi-synthetic, mineral water) and add various chemical additives. The fact that a certain brand of motor oil is suitable for a particular car model can be indicated by the tolerances on the canister. At the same time, people buy oils for the summer that are more viscous than for the winter.
Motor oil in the engine prevents friction of parts by creating an oil film.
Taking into account the fact that the speedometer constantly rolls up numbers, the properties of the oil in the Nissan Almera Classic car deteriorate significantly. Replacing a liquid substance in a 2014 Almera Classic car is a standard procedure, not complicated, but very important. This process should not be delayed. We will tell you how to change the oil in a Nissan Almera Classic engine.
[Hide]
What kind of oil should I fill in?
One of the most popular questions on forums in 2014 is what kind of oil can be poured into the Nissan Almera Classic engine? And of course, how much of it will be needed? According to the latest responses from 2014, some drivers prefer to choose the Shel brand of liquid substance.
But I would like to immediately warn you that you cannot just randomly trust unverified sources and choose a liquid element. Since it must first of all be suitable for your car and have good viscosity. You can determine what viscosity you need by reading the instruction manual. Alternatively, you can use Nissan 5W-30 SN engine oil. It has excellent viscosity and, as you know, the original lubricant is considered more reliable and of higher quality.
Engine oil Nissan 5W30 SN
Having decided which motor substance you will use, you need to purchase the required volume. You will need about 3 liters. Another plus for Nissan 5W-30 SN is that they produce exactly the required displacement of the viscous element.
Tools
Again, having decided on the choice of liquid to be poured into the engine, you can proceed to the following steps. Before the replacement begins, you need to familiarize yourself with the list of tools that you need to have with you to carry out the procedure.
In order for the engine replacement to be successful, you need to have the following tools:
- key to "14";
- rags;
- new oil filter (preferably);
- rag, funnel;
- container for draining;
- new motor oil (manufacture date must not be earlier than 2014).
Step-by-step instruction
Having read all the previous points, the replacement can begin. The following instructions must be followed:
Done, the replacement of the liquid substance was successfully carried out. We hope you were able to decide which oil is best to pour into your car. If not, then you can leave a question in the comments.
Video “Changing the oil”
In this video you can see how you can change the oil yourself without going to a service station.
In search of answers to the question of what oil to fill in the Nissan Almera Classic, owners of one of the most popular car models from the Japanese manufacturer spend a huge amount of time communicating on forums and studying the basic parameters of the car. The issue of replacing lubricating fluids must be approached with special responsibility, because correctly selected high-quality oil can have a direct impact on the life of the power unit.
What engine oil is best to fill into the Nissan Almera Classic engine in summer?
When looking for an answer to the question of which engine oil is best to pour into the Nissan Almera Classic engine in the summer, it is recommended to refer to the vehicle’s technical data sheet. According to the regulations, engine oil must be changed every 50-60 thousand kilometers of the vehicle.
Nissan recommends using exclusively branded oils, which can be found in almost every car store. Largely due to the viscosity class 5W30 and 5W40, branded oils can be filled regardless of the season; the standard olive package from the manufacturer contains 4 liters of liquid.
At the same time, practice shows that Almeria engines also accept other synthetic motor oils very well. Currently, alternatives to Nissan branded fluid are:
Mobil1 (5w40, 5w30);
- Total (Quartz Future NFC 5w-30);
- Petro-Canada (Supreme Synthetic 5W-30). Also, to avoid mixing the engine oil with gasoline or diesel fuel, it is recommended to install a new Mann W610/3 oil filter at each oil change.
What oil is better to fill in an automatic transmission (automatic transmission) of a Nissan Almera classic?
In most cases, problems with automatic transmissions are due to the fact that the owners of this car model do not know which oil is best to fill in the automatic transmission (automatic transmission) of Nissan Almera classic. This is why the choice of transmission fluid for replacement should be given special attention.
The manufacturer himself recommends using the branded Nissan ATF Matic Fluid D transmission oil, supplied in a 12-liter package. If the required fluid is not available, Petro-Canada (DuraDrive MV Sunthetic ATF) and Valvoline (MaxLife ATF) transmission oils are acceptable alternatives.
It is recommended to change the automatic transmission oil according to the regulations specified in the vehicle’s operating manual. Also, this procedure can solve the problem with frequent transmission jolts when changing gears and improve the smooth operation of the lever.
What kind of oil is poured into the mechanics at the factory (officials) in winter for the Nissan Almera Classic?
Problems with the manual transmission after changing the transmission oil may arise as a result of the fact that car owners do not know what kind of oil is poured into the mechanics at the factory (officials) in winter for the Nissan Almera Classic. From the inside, the car's gearbox uses Nissan branded oil, which is quite logical. When taking a car from the secondary market, it is recommended to ask whether the previous owner changed the oil, and also find out what brand of fluid was poured into the gearbox.
